MEK

Predrilled enclosure Eddystone 27134PLSA - 111x60x31
incl. 4 screws and 4 adhesive rubber feets

Drills:
2x Potentiometer: Drill [...]

Predrilled enclosure Eddystone 27134PLSA - 111x60x31
incl. 4 screws and 4 adhesive rubber feets

Drills:
4x Potentiometer: Drill [...]

Kit to build a Tap tempo module with LED for the PT-80 delay.
You need only a SPST, SPDT or DPST switch momentary
You can use it also with [...]

PCB for 3PDT switch standard SL/ pcb
also fit for the PCB/SL mini 3PDT
Dimension: 20mm x 20mm

Kit to build a Colorsond(R) Tremolo. You need only two Knobs for shaft with 6,35mm and a max. diameter of 23mm, if used a 1590B enclosure and a [...]

Kit to build a silicon fuzz face. you need only 3 knobs (1/4" max. diameter 20mm) and a enclosure.


Contents:

1x 3PDT [...]

Kit to build your own BluesBro. You need only 3 knobs (max. diameter to 20mm/ shaft 6,35mm - 0.25" for a 1290 predrilled enclosure)and a eclosure of [...]

Kit to build a BSIAB2 (Brown sound in the box) a metal like distortion pedal. Needed becomes only 3 knob's for shaft with a diameter of 6,35mm (max. [...]

Circuit board to the making Colorsound Tremolo clone, drilled and solder mask, Measurement 55x35mm fitting for Hammond 1590 B or other, wiring [...]

Circuit board to build a Fuzz Faces with Silicon NPN Transistors/negative gound. Millenium-bypass circuit on board. Circuit board drilled, tinned, [...]

Kit to build digital delay with the famous PT2399 Chip with a tap tempo function. Pump charge 9--> 18V on board. You need only 3 knobs for shaft [...]

Circuit board to the making a mini booster, drilled and solder mask, Measurement 55x35mm fitting for Hammond 1590 B or other, wiring [...]